Ph 1300 638 776 (NETPRO)
26 12, 2017

Monofilament

By |2019-01-31T13:39:38+10:00December 26th, 2017|Comments Off on Monofilament

A single strand is used in the weaving process; the strand is flattened to a ribbon-like shape, rather than a thread-shape.

26 12, 2017

ASTM

By |2019-01-31T13:40:34+10:00December 26th, 2017|Comments Off on ASTM

American Society for Testing and Materials

26 12, 2017

UV Block vs Shade

By |2019-01-31T13:41:03+10:00December 26th, 2017|Comments Off on UV Block vs Shade

Shade is the blocking of all light; UV Block only refers to the ultraviolet spectrum of light.

26 12, 2017

UV Inhibitors / Stabilizers

By |2019-01-31T13:49:06+10:00December 26th, 2017|Comments Off on UV Inhibitors / Stabilizers

Chemical additives added at the time of yarn manufacture to prevent the yarns from biodegrading due to the effects of UltraViolet light.

26 12, 2017

Weft

By |2019-01-31T13:49:51+10:00December 26th, 2017|Comments Off on Weft

Yarns running across the fabric.

26 12, 2017

Warp

By |2019-01-31T13:50:29+10:00December 26th, 2017|Comments Off on Warp

Yarns running along the length of the fabric.

26 12, 2017

HDPP

By |2019-01-31T13:51:32+10:00December 26th, 2017|Comments Off on HDPP

High Density PolyPropylene

26 12, 2017

HDPE

By |2019-01-31T13:59:12+10:00December 26th, 2017|Comments Off on HDPE

High Density PolyEthylene, has superior abrasion resistance compared to HDPP and is the preferred choice for horticultural / agricultural textiles.

26 12, 2017

Grab Tensile Strength

By |2019-01-31T13:59:54+10:00December 26th, 2017|Comments Off on Grab Tensile Strength

ASTMD D 5034 grab method (Force required to break the warp and weft yarns).

26 12, 2017

Mullen Burst Strength

By |2019-01-31T14:00:28+10:00December 26th, 2017|Comments Off on Mullen Burst Strength

ASTM D 3786 diaphram method (Force required to break the yarns and burst a hole through the fabric).